Radio-frequency modulation and Bessel functions¶
This example demonstrates the basic use of modulators and amplitude detectors for detecting specific frequency components of the light field.
The optical configuration¶
The optical layout simply consists of a laser, an electro-optical
Modulator (EOM) and three
AmplitudeDetectors. Note that all three
detectors are connected to the same node and thus probe the same field amplitude.
The Finesse model¶
import finesse
finesse.configure(plotting=True)
kat = finesse.Model()
kat.parse(
"""
# Laser with power 1W
laser L0 P=1
s s0 L0.p1 eom1.p1
# Phase modulator at 40kHz, with a modulation index of 0.05
mod eom1 f=40k midx=.05 order=5 mod_type=pm
# Three amplitude detectors, looking at the first three positive modulation
# sidebands
ad bessel1 eom1.p2.o f=40k
ad bessel2 eom1.p2.o f=80k
ad bessel3 eom1.p2.o f=120k
"""
)
A laser beam is passed through an electro-optical modulator (EOM) which applies a phase
modulation with a frequency of 40 kHz and a modulation index of 0.05. The modulator is
set such that up to five orders or sidebands will be created (at plus/minus 40, 80, 120,
160 and 200 kHz respectively). The modulated beam is then detected with three amplitude
detectors, each of which is set to a particular frequency. This means, for example, that
the detector bessel2 can only ‘see’ the sideband at +80 kHz and no other part of the
beam.
Output plots¶
# Sweep the modulation index of the modulator from 0 to 10
out = kat.run("xaxis(eom1.midx, lin, 0, 10, 300)")
out.plot();
Phase modulation (with up to five higher harmonics) is applied to a laser beam and amplitude detectors are used to measure the field at the first three harmonics. The three traces show the amplitude of the single sidebands at 40kHz, 80 kHz and 120 kHz as a function of the modulation index at the modulator. The sideband amplitude are given as Bessel functions of the first kind \(J_n(m)\) with \(n\) being the sideband order and \(m\) the modulation index.