Introduction to Finesse¶
Finesse is a simulation program for interferometers. The user can build any kind of virtual laser interferometer using the following components:
lasers, with user-defined power, wavelength and shape of the output beam;
free spaces with arbitrary index of refraction;
mirrors and beam splitters, with flat or spherical surfaces;
modulators to change amplitude and phase of the laser light;
amplitude or power detectors with the possibility of demodulating the detected signal with one or more given demodulation frequencies;
lenses and isolators.
For a given optical setup, the program computes the light field amplitudes at every point in the interferometer assuming a steady state. To do so, the interferometer description is translated into a set of linear equations that are solved numerically. For convenience, a number of standard analyses can be performed automatically by the program, namely computing modulation-demodulation error signals and transfer functions. Finesse can perform the analysis using plane waves or Hermite-Gauss modes. The latter allows computation of the effects of mode matching and misalignments. In addition, error signals for automatic alignment systems can be simulated.
Literally every parameter of the interferometer description can be tuned during the simulation. The typical output is a plot of a photodetector signal as a function of one or two parameters of the interferometer (e.g. arm length, mirror reflectivity, modulation frequency, mirror alignment). Optional text output provides information about the optical setup including, but not limited to, mode mismatch coefficients, eigenmodes of cavities and beam sizes.
Finesse provides a fast and versatile tool that has proven to be very useful during design and commissioning of interferometric gravitational wave detectors. However, the program has been designed to allow the analysis of arbitrary, user-defined optical setups. In addition, it is easy to install and easy to use. Therefore Finesse is very well suited to study basic optical properties, like, for example, the power enhancement in a resonating cavity or modulation-demodulation methods.
Motivation and History¶
The search for gravitational waves with interferometric detectors has led to a new type of laser interferometer: new topologies are formed combining known interferometer types. In addition, the search for gravitational waves requires optical systems with a very long baseline, large circulating power and an enormous stability. The properties of this new class of laser interferometers have been the subject of extensive research for several decades.
Finesse has been used to support the research on laser interferometers for gravitational wave detection since 1999 , and since 2013 Finesse is continuously developed as an open source project . More about the background and the early years of Finesse (and Pykat) are available in the History section.
Finesse has become an important tool for the commissioning of Advanced LIGO , Advanced Virgo  and KAGRA  and is used for the design of future detectors such as the Einstein Telescope . The Impact section lists more than 100 documents citing Finesse.
Finesse version 3 is a complete re-development, started in 2017, of both the original software, and its eventual wrapper and utility code Pykat . The main aim of the redevelopment was to transform our well tested and established tool with a large active user base into a modern software package and to make Finesse ready for the next 20 years of active research in laser interferometry.
Several prototype interferometers had been developed to investigate laser-interferometer technologies for detecting gravitational waves. This was followed by the work on the large-scale laser interferometric gravitational wave detectors that led to the first direct detection of a gravitational wave by the LIGO interferometers in 2015 . Gravitational-wave astronomy is now an established field in science in which instrument science remains a major challenge.
The optical systems involved, Fabry-Perot cavities, a Michelson interferometer and combinations thereof are in principle simple and have been used in many fields of science for many decades. The sensitivity required for the detection of the expected small signal amplitudes of gravitational waves, however, has put new constraints on the design of laser interferometers. The work of the gravitational wave research groups has led to a new exploration of the theoretical analysis of laser interferometers. Especially, the clever combination of known interferometers has produced new types of interferometric detectors that offer an optimised sensitivity for detecting gravitational waves. We have shown that the models describing the optical system become very complex even though they are based on simple principles. Consequently, computer programs have been developed to automate the computational part of the analysis. To date, several custom-made programs for analysing optical systems are available to the gravitational wave community, and Finesse is one of the most widely used tools in this field.