from abc import ABC
from math import isclose
import numpy as np
from ..parameter import float_parameter
from ..symbols import Resolving, Symbol
from ..utilities.misc import calltracker
from .general import Connector
[docs]@float_parameter("R", "Reflectivity", validate="_check_R", setter="set_RTL")
@float_parameter("T", "Transmission", validate="_check_T", setter="set_RTL")
@float_parameter("L", "Loss", validate="_check_L", setter="set_RTL")
@float_parameter("phi", "Phase", units="degrees")
@float_parameter(
"Rcx",
"Radius of curvature (x)",
units="m",
validate="_check_Rc",
is_geometric=True,
)
@float_parameter(
"Rcy",
"Radius of curvature (y)",
units="m",
validate="_check_Rc",
is_geometric=True,
)
@float_parameter("xbeta", "Misalignment (x)", units="radians")
@float_parameter("ybeta", "Misalignment (y)", units="radians")
# IMPORTANT: renaming this class impacts the katscript spec and should be avoided!
class Surface(ABC, Connector):
"""Abstract optical surface interface providing an object with common properties for
:class:`.Mirror` and :class:`.Beamsplitter` to inherit from.
Parameters
----------
name : str
Name of newly created surface.
R : float, optional
Reflectivity of the surface.
T : float, optional
Transmissivity of the surface.
L : float, optional
Loss of the surface.
phi : float, optional
Microscopic tuning of the surface (in degrees).
Rc : float, optional
Radius of curvature (in metres); defaults to ``numpy.inf`` to indicate a planar
surface. An astigmatic surface can be set with `Rc = (Rcx, Rcy)`.
"""
[docs] def __init__(self, name, R, T, L, phi, Rc, xbeta, ybeta):
Connector.__init__(self, name)
# only in constructor allow setting of none of R, T, L
# -> default to equally reflective and tranmissive with no loss
if R is None and T is None and L is None:
# Use some default
self.set_RTL(0.5, T=0.5, L=0)
else:
self.set_RTL(R, T, L)
self.phi = phi
self.Rc = Rc
self.xbeta = xbeta
self.ybeta = ybeta
def _check_R(self, value):
if not 0 <= value <= 1:
raise ValueError("Reflectivity must satisfy 0 <= R <= 1")
return value
def _check_T(self, value):
if not 0 <= value <= 1:
raise ValueError("Transmissivity must satisfy 0 <= T <= 1")
return value
def _check_L(self, value):
if not 0 <= value <= 1:
raise ValueError("Loss must satisfy 0 <= L <= 1")
return value
def _check_Rc(self, value):
if value == 0:
raise ValueError("Radius of curvature must be non-zero.")
return value
[docs] @calltracker
def set_RTL(self, R=None, T=None, L=None):
"""Set the values for the R, T and L properties of the surface.
One of the following combination must be specified:
- R and T or,
- R and L or,
- T and L or,
- R and T and L
In the first three cases, the remaining parameter is set via
the condition,
.. math::
R + T + L = 1
Parameters
----------
R : scalar
Value of the reflectivity to set.
T : scalar
Value of the transmissivity to set.
L : scalar
Value of the loss to set.
Raises
------
ValueError
If a combination other than one of the above is specified.
Or if R, T and L are all given but they sum to anything other than one.
"""
# Try and cast the input into a float, the datatype of the
# R/T/L parameters. If it can't just ignore it, as it could be
# None or some callable, or something else. Need this because
# the usual datatype casting doesn't happen until much later
# with this setter, and it is used to R/T/L in the contructor
# not self.R = R, etc.
if R is not None and not isinstance(R, Symbol):
R = self.R.datatype_cast(R)
if T is not None and not isinstance(T, Symbol):
T = self.T.datatype_cast(T)
if L is not None and not isinstance(L, Symbol):
L = self.L.datatype_cast(L)
# if any of R, T, L set with parameter refs in kat file
# syntax then just set each attribute directly here and
# skip completion of third argument / checking of RTL sum
if any(isinstance(x, Resolving) for x in (R, T, L)):
if R is not None:
self.R = R
if T is not None:
self.T = T
if L is not None:
self.L = L
return
N = sum(x is not None for x in (R, T, L))
if N < 2:
msg = f"""Invalid combination passed to {self.name}.set_RTL. One of the
following must be specified:
- R and T or,
- R and L or,
- T and L or,
- R and T and L
"""
raise ValueError(msg.strip())
if N == 2:
old_R = self.R.value
old_T = self.T.value
old_L = self.L.value
try:
if R is not None:
self.R = R
else:
self.R = 1 - (T + L)
if T is not None:
self.T = T
else:
self.T = 1 - (R + L)
if L is not None:
self.L = L
else:
self.L = 1 - (R + T)
except ValueError:
self.R = old_R
self.T = old_T
self.L = old_L
raise
else:
RTL_sum = R + T + L
try:
# Evaluate symbolics, if necessary.
RTL_sum = RTL_sum.eval()
except AttributeError:
pass
# FIXME: decide what the necessary tolerance is here.
if not isclose(RTL_sum, 1):
msg = (
f"Expected R + T + L = 1 in {self.name}.set_RTL but "
f"got R + T + L = {RTL_sum}"
)
raise ValueError(msg)
self.R = R
self.T = T
self.L = L
@property
def Rc(self):
"""The radius of curvature of the mirror in metres, for both the tangential and
sagittal planes.
:`getter`: Returns values of both planes' radii of curvature as a
:class:`numpy.ndarray` where the first element is the tangential
plane RoC and the second element is the sagittal plane RoC.
:`setter`: Sets the radius of curvature.
Examples
--------
The following sets the radii of curvature of an object `m`, which
is a sub-instance of `Surface`, in both directions to 2.5 m:
>>> m.Rc = 2.5
Whilst this would set the radius of curvature in the x-direction (tangential
plane) to 2.5 m and the radius of curvature in the y-direction (sagittal plane)
to 2.7 m:
>>> m.Rc = (2.5, 2.7)
"""
return np.array([self.Rcx.value, self.Rcy.value])
@Rc.setter
def Rc(self, value):
try:
self.Rcx = value[0]
self.Rcy = value[1]
except (IndexError, TypeError):
self.Rcx = value
self.Rcy = value
[docs] def actuate_roc(self, dioptres, direction=("x", "y")):
r"""Actuate on the radius of curvature (RoC) of the surface with a specified
dioptre shift.
Sets the RoC to a new value, :math:`R_2`, via,
.. math::
R_2 = \frac{2}{d + \frac{2}{R_1}},
where :math:`R_1` is the current RoC and :math:`d` is the dioptre shift (i.e.
the `dioptre` argument).
By default, both planes of curvature are shifted. To shift, e.g., only the
tangential plane, specify ``direction="x"``.
Parameters
----------
dioptres : float
Shift in surface RoC in dioptres.
direction : tuple or str, optional; default: ("x", "y")
RoC plane to shift, defaults to both tangential and sagittal.
"""
rcnew = lambda x: 2 / (dioptres + 2 / x)
if "x" in direction:
self.Rcx = rcnew(self.Rcx.value)
if "y" in direction:
self.Rcy = rcnew(self.Rcy.value)
# NOTE this is a bit hacky but gets around using surface.R = value (etc.)
# directly in an axis scan without being warned
def _on_build(self, sim):
self.set_RTL.__func__.has_been_called = True
def _on_unbuild(self, sim):
self.set_RTL.__func__.has_been_called = False