"""Dielectric interface type components representing physical mirrors."""
import logging
import types
import numpy as np
from finesse.parameter import float_parameter, bool_parameter
from finesse.utilities import refractive_index
from finesse.components.general import InteractionType, NoiseType, DOFDefinition
from finesse.components.surface import Surface
from finesse.components.node import NodeDirection, NodeType
from finesse.tracing import abcd
from finesse.symbols import Constant
LOGGER = logging.getLogger(__name__)
[docs]@float_parameter("R", "Reflectivity", validate="_check_R", setter="set_RTL")
@float_parameter("T", "Transmission", validate="_check_T", setter="set_RTL")
@float_parameter("L", "Loss", validate="_check_L", setter="set_RTL")
@float_parameter(
"phi", "Microscopic tuning (360 degrees = 1 default wavelength)", units="degrees"
)
@float_parameter(
"Rcx",
"Radius of curvature (x)",
units="m",
validate="_check_Rc",
is_geometric=True,
)
@float_parameter(
"Rcy",
"Radius of curvature (y)",
units="m",
validate="_check_Rc",
is_geometric=True,
)
@float_parameter("xbeta", "Yaw misalignment", units="radians")
@float_parameter("ybeta", "Pitch misalignment", units="radians")
@bool_parameter("misaligned", "Misaligns mirror reflection (R=0 when True)")
class Mirror(Surface):
"""The mirror component represents a thin dielectric surface with associated
properties such as reflectivity, tuning, and radius of curvature. It has two optical
ports `p1` and `p2` which decsribe the two beams incident on either side of this
surface. It also has a mechanical port `mech` which has nodes for longitudinal, yaw,
and pitch motions. These mechanical nodes are purely for exciting small signal
oscillations of the mirror. Static offsets in longitudinal displacements are set by
the `phi` parameter (in units of degrees), yaw by the `xbeta` parameter, and pitch
the `ybeta` parameter.
Parameters
----------
name : str
Name of newly created mirror.
R : float, optional
Reflectivity of the mirror; defaults to 0.5.
T : float, optional
Transmittance of the mirror; defaults to 0.5.
L : float, optional
Loss of the mirror; defaults to 0.0.
phi : float, optional
Tuning of the mirror (in degrees); defaults to 0.0.
Rc : float or container of two floats, optional
The radius of curvature of the mirror (in metres); defaults to a flat mirror (`Rc=np.inf`).
Astigmatic mirrors can also be set with `Rc=(Rcx, Rcy)`.
xbeta, ybeta : float, optional
Misalignment of the mirror in yaw and pitch in units of radians
misaligned : bool, optional
When True the mirror will be significantly misaligned and
assumes any reflected beam is dumped. Transmissions will
still occur.
Attributes
----------
Attributes are set via the Python API and not available via KatScript.
surface_map : :class:`finesse.knm.Map`
Decsribes the surface distortion of this mirror component.
Coordinate system to the map is right-handed with the postive-z
direction as the surface normal on the port 1 side of the mirror.
"""
[docs] def __init__(
self,
name,
R=None,
T=None,
L=None,
phi=0,
Rc=np.inf,
xbeta=0,
ybeta=0,
misaligned=False,
):
super().__init__(name, R, T, L, phi, Rc, xbeta, ybeta)
self.misaligned = misaligned
self._add_port("p1", NodeType.OPTICAL)
self.p1._add_node("i", NodeDirection.INPUT)
self.p1._add_node("o", NodeDirection.OUTPUT)
self._add_port("p2", NodeType.OPTICAL)
self.p2._add_node("i", NodeDirection.INPUT)
self.p2._add_node("o", NodeDirection.OUTPUT)
# Optic to optic couplings
self._register_node_coupling(
"P1i_P1o",
self.p1.i,
self.p1.o,
interaction_type=InteractionType.REFLECTION,
# enabled_check=lambda: self.R > 0 and not self.R.is_changing
)
self._register_node_coupling(
"P2i_P2o",
self.p2.i,
self.p2.o,
interaction_type=InteractionType.REFLECTION,
# enabled_check=lambda: self.R > 0 and not self.R.is_changing
)
self._register_node_coupling(
"P1i_P2o",
self.p1.i,
self.p2.o,
interaction_type=InteractionType.TRANSMISSION,
# enabled_check=lambda: self.T > 0 and not self.T.is_changing
)
self._register_node_coupling(
"P2i_P1o",
self.p2.i,
self.p1.o,
interaction_type=InteractionType.TRANSMISSION,
# enabled_check=lambda: self.T > 0 and not self.T.is_changing
)
# Mirror motion couplings
self._add_port("mech", NodeType.MECHANICAL)
self.mech._add_node("z", NodeDirection.BIDIRECTIONAL)
self.mech._add_node("yaw", NodeDirection.BIDIRECTIONAL)
self.mech._add_node("pitch", NodeDirection.BIDIRECTIONAL)
self.mech._add_node("F_z", NodeDirection.BIDIRECTIONAL)
self.mech._add_node("F_yaw", NodeDirection.BIDIRECTIONAL)
self.mech._add_node("F_pitch", NodeDirection.BIDIRECTIONAL)
# Optic to motion couplings
self._register_node_coupling("P1i_Fz", self.p1.i, self.mech.F_z)
self._register_node_coupling("P2i_Fz", self.p2.i, self.mech.F_z)
self._register_node_coupling("P1o_Fz", self.p1.o, self.mech.F_z)
self._register_node_coupling("P2o_Fz", self.p2.o, self.mech.F_z)
self._register_node_coupling("P1i_Fyaw", self.p1.i, self.mech.F_yaw)
self._register_node_coupling("P2i_Fyaw", self.p2.i, self.mech.F_yaw)
self._register_node_coupling("P1o_Fyaw", self.p1.o, self.mech.F_yaw)
self._register_node_coupling("P2o_Fyaw", self.p2.o, self.mech.F_yaw)
self._register_node_coupling("P1i_Fpitch", self.p1.i, self.mech.F_pitch)
self._register_node_coupling("P2i_Fpitch", self.p2.i, self.mech.F_pitch)
self._register_node_coupling("P1o_Fpitch", self.p1.o, self.mech.F_pitch)
self._register_node_coupling("P2o_Fpitch", self.p2.o, self.mech.F_pitch)
# motion to optic coupling: phase coupling on reflection
self._register_node_coupling("Z_P1o", self.mech.z, self.p1.o)
self._register_node_coupling("Z_P2o", self.mech.z, self.p2.o)
self._register_node_coupling("yaw_P1o", self.mech.yaw, self.p1.o)
self._register_node_coupling("yaw_P2o", self.mech.yaw, self.p2.o)
self._register_node_coupling("pitch_P1o", self.mech.pitch, self.p1.o)
self._register_node_coupling("pitch_P2o", self.mech.pitch, self.p2.o)
self.__changing_check = set(
(self.R, self.T, self.L, self.phi, self.xbeta, self.ybeta)
)
self.surface_map = None
# Define typical degrees of freedom for this component
self.dofs = types.SimpleNamespace()
self.dofs.z = DOFDefinition(f"{self.name}.dofs.z", self.phi, self.mech.z, None)
self.dofs.yaw = DOFDefinition(
f"{self.name}.dofs.yaw", self.xbeta, self.mech.yaw, 1
)
self.dofs.pitch = DOFDefinition(
f"{self.name}.dofs.pitch", self.ybeta, self.mech.pitch, 1
)
self.dofs.F_z = DOFDefinition(
f"{self.name}.dofs.F_z", None, self.mech.F_z, None
)
self.dofs.F_yaw = DOFDefinition(
f"{self.name}.dofs.F_yaw", None, self.mech.F_yaw, None
)
self.dofs.F_pitch = DOFDefinition(
f"{self.name}.dofs.F_pitch", None, self.mech.F_pitch, None
)
def _resymbolise_ABCDs(self):
# -> reflections
self.__symbolise_ABCD(self.p1.i, self.p1.o, "x")
self.__symbolise_ABCD(self.p1.i, self.p1.o, "y")
self.__symbolise_ABCD(self.p2.i, self.p2.o, "x")
self.__symbolise_ABCD(self.p2.i, self.p2.o, "y")
# -> transmissions
self.__symbolise_ABCD(self.p1.i, self.p2.o, "x")
self.__symbolise_ABCD(self.p1.i, self.p2.o, "y")
self.__symbolise_ABCD(self.p2.i, self.p1.o, "x")
self.__symbolise_ABCD(self.p2.i, self.p1.o, "y")
@property
def refractive_index_1(self):
"""Refractive index on size 1 (port 1)"""
if self.p1.attached_to:
return self.p1.refractive_index
else:
return Constant(1)
@property
def refractive_index_2(self):
"""Refractive index on size 2 (port 2)"""
if self.p2.attached_to:
return self.p2.refractive_index
else:
return Constant(1)
def __symbolise_ABCD(self, from_node, to_node, direction):
if direction == "x":
Rc = self.Rcx.ref
else:
Rc = self.Rcy.ref
if self.interaction_type(from_node, to_node) == InteractionType.REFLECTION:
# reflection
nr = refractive_index(from_node, symbolic=True)
if from_node.port is self.p1:
M_sym = abcd.mirror_refl(Rc, nr=nr)
else:
M_sym = abcd.mirror_refl(-Rc, nr=nr)
else: # transmission
nr1 = self.refractive_index_1
nr2 = self.refractive_index_2
if from_node.port is self.p1:
M_sym = abcd.mirror_trans(Rc, nr1=nr1, nr2=nr2)
else:
M_sym = abcd.mirror_trans(-Rc, nr1=nr2, nr2=nr1)
key = (from_node, to_node, direction)
# For mirrors the symbol nr can change when connected up to spaces
# in a model so here we update the ABCD matrix entry
if key in self._abcd_matrices:
self._abcd_matrices[key] = M_sym, np.array(M_sym, dtype=np.float64)
# Otherwise just register the new ABCD matrix as usual
else:
self.register_abcd_matrix(M_sym, (from_node, to_node, direction))
@property
def abcd11x(self):
"""Numeric ABCD matrix from port 1 to port 1 in the tangential plane.
Equivalent to ``mirror.ABCD(1, 1, "x")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(1, 1, "x")
@property
def abcd11y(self):
"""Numeric ABCD matrix from port 1 to port 1 in the sagittal plane.
Equivalent to ``mirror.ABCD(1, 1, "y")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(1, 1, "y")
@property
def abcd22x(self):
"""Numeric ABCD matrix from port 2 to port 2 in the tangential plane.
Equivalent to ``mirror.ABCD(2, 2, "x")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(2, 2, "x")
@property
def abcd22y(self):
"""Numeric ABCD matrix from port 2 to port 2 in the sagittal plane.
Equivalent to ``mirror.ABCD(2, 2, "y")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(2, 2, "y")
@property
def abcd12x(self):
"""Numeric ABCD matrix from port 1 to port 2 in the tangential plane.
Equivalent to ``mirror.ABCD(1, 2, "x")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(1, 2, "x")
@property
def abcd12y(self):
"""Numeric ABCD matrix from port 1 to port 2 in the sagittal plane.
Equivalent to ``mirror.ABCD(1, 2, "y")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(1, 2, "y")
@property
def abcd21x(self):
"""Numeric ABCD matrix from port 2 to port 1 in the tangential plane.
Equivalent to ``mirror.ABCD(2, 1, "x")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(2, 1, "x")
@property
def abcd21y(self):
"""Numeric ABCD matrix from port 2 to port 1 in the sagittal plane.
Equivalent to ``mirror.ABCD(2, 1, "y")``.
:getter: Returns a copy of the (numeric) ABCD matrix for this coupling (read-only).
"""
return self.ABCD(2, 1, "y")
[docs] def ABCD(
self,
from_node,
to_node,
direction="x",
symbolic=False,
copy=True,
retboth=False,
):
r"""Returns the ABCD matrix of the mirror for the specified coupling.
In both cases below, the sign of the radius is defined such that :math:`R_c`
is negative if the centre of the sphere is located in the direction of propagation.
.. rubric:: Transmission
.. _fig_abcd_mirror_transmission:
.. figure:: ../images/abcd_mi.*
:align: center
For transmission this is given by,
.. math::
M_{t} = \begin{pmatrix}
1 & 0 \\
\frac{n_2 - n_1}{R_c} & 1
\end{pmatrix},
where :math:`n_2` and :math:`n_1` are the indices of refraction of the spaces
connected to the mirror and :math:`R_c` is the radius of curvature of the mirror.
The matrix for transmission in the opposite direction of propagation is identical.
.. rubric:: Reflection
.. _fig_abcd_mirror_reflection:
.. figure:: ../images/abcd_mr.*
:align: center
In the case of reflection the matrix is,
.. math::
M_{r} = \begin{pmatrix}
1 & 0 \\
-\frac{2n_1}{R_c} & 1
\end{pmatrix}.
Reflection at the back surface can be described by the same type of matrix by setting
the :math:`C` element to :math:`C = 2n_2/R_c`.
See :meth:`.Connector.ABCD` for descriptions of parameters, return values and possible
exceptions.
"""
return super().ABCD(from_node, to_node, direction, symbolic, copy, retboth)
def _get_workspace(self, sim):
"""Returns a workspace to use in a simulation."""
from finesse.simulations.basematrix import CarrierSignalMatrixSimulation
if isinstance(sim, CarrierSignalMatrixSimulation):
from finesse.components.modal.mirror import (
mirror_carrier_fill,
mirror_signal_opt_fill,
mirror_signal_mech_fill,
mirror_fill_qnoise,
MirrorWorkspace,
)
_, is_changing = self._eval_parameters()
carrier_refill = (
sim.is_component_in_mismatch_couplings(self)
or self in sim.trace_forest
or sim.carrier.any_frequencies_changing
or len(is_changing)
)
ws = MirrorWorkspace(self, sim)
# This assumes that nr1/nr2 cannot change during a simulation
ws.nr1 = refractive_index(self.p1)
ws.nr2 = refractive_index(self.p2)
ws.carrier.add_fill_function(mirror_carrier_fill, carrier_refill)
if sim.signal:
signal_refill = carrier_refill or (
sim.model.fsig.f.is_changing
and not (self.phi.value == 0 and self.phi.is_changing)
)
ws.signal.add_fill_function(mirror_signal_opt_fill, signal_refill)
signal_refill = carrier_refill or (sim.model.fsig.f.is_changing)
ws.signal.add_fill_function(mirror_signal_mech_fill, signal_refill)
# Initialise the ABCD matrix memory-views
if sim.is_modal:
ws.abcd_p1p1_x = self.ABCD(self.p1.i, self.p1.o, "x", copy=False)
ws.abcd_p1p1_y = self.ABCD(self.p1.i, self.p1.o, "y", copy=False)
ws.abcd_p2p2_x = self.ABCD(self.p2.i, self.p2.o, "x", copy=False)
ws.abcd_p2p2_y = self.ABCD(self.p2.i, self.p2.o, "y", copy=False)
ws.abcd_p1p2_x = self.ABCD(self.p1.i, self.p2.o, "x", copy=False)
ws.abcd_p1p2_y = self.ABCD(self.p1.i, self.p2.o, "y", copy=False)
ws.abcd_p2p1_x = self.ABCD(self.p2.i, self.p1.o, "x", copy=False)
ws.abcd_p2p1_y = self.ABCD(self.p2.i, self.p1.o, "y", copy=False)
ws.set_knm_info(
"P1i_P1o",
abcd_x=ws.abcd_p1p1_x,
abcd_y=ws.abcd_p1p1_y,
nr_from=ws.nr1,
nr_to=ws.nr1,
is_transmission=False,
beta_x=self.xbeta,
beta_x_factor=2,
beta_y=self.ybeta,
beta_y_factor=-2,
apply_map=self.surface_map,
map_phase_factor=-2 * ws.nr1,
map_fliplr=False,
)
ws.set_knm_info(
"P2i_P2o",
abcd_x=ws.abcd_p2p2_x,
abcd_y=ws.abcd_p2p2_y,
nr_from=ws.nr2,
nr_to=ws.nr2,
is_transmission=False,
beta_x=self.xbeta,
beta_x_factor=2,
beta_y=self.ybeta,
beta_y_factor=2,
apply_map=self.surface_map,
map_phase_factor=2 * ws.nr2,
map_fliplr=True,
)
ws.set_knm_info(
"P1i_P2o",
abcd_x=ws.abcd_p1p2_x,
abcd_y=ws.abcd_p1p2_y,
nr_from=ws.nr1,
nr_to=ws.nr2,
is_transmission=True,
beta_x=self.xbeta,
beta_x_factor=-(1 - ws.nr1 / ws.nr2),
beta_y=self.ybeta,
beta_y_factor=(1 - ws.nr1 / ws.nr2),
apply_map=self.surface_map,
map_phase_factor=(ws.nr2 - ws.nr1),
map_fliplr=False,
)
ws.set_knm_info(
"P2i_P1o",
abcd_x=ws.abcd_p2p1_x,
abcd_y=ws.abcd_p2p1_y,
nr_from=ws.nr2,
nr_to=ws.nr1,
is_transmission=True,
beta_x=self.xbeta,
beta_x_factor=-(1 - ws.nr2 / ws.nr1),
beta_y=self.ybeta,
beta_y_factor=-(1 - ws.nr2 / ws.nr1),
apply_map=self.surface_map,
map_phase_factor=-(ws.nr1 - ws.nr2),
map_fliplr=True,
)
if sim.signal:
ws.signal.set_fill_noise_function(NoiseType.QUANTUM, mirror_fill_qnoise)
return ws