"""Collection of Actions that deal linear time invariant (LTI) modelling tasks."""
from finesse.solutions import BaseSolution
from .base import Action, convert_str_to_parameter
import numpy as np
import logging
from finesse.simulations import CarrierSignalMatrixSimulation
# from finesse.components.readout import ReadoutDetectorOutput
from finesse.utilities.misc import is_iterable
LOGGER = logging.getLogger(__name__)
[docs]class OptimizeSolution(BaseSolution):
"""Solution for an optimization action.
Attributes
----------
result : scipy.optimize.optimize.OptimizeResult
Result from the scipy optimization method that contains the results and some
extra data about the process and any errors that might happen.
parameters : [Parameter | tuple]
Name or names of parameters that were optimized over
x : [numeric | ndarray]
The final minimized values for the parameters requested.
"""
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
self.result = None
self.x = None
self.parameters = None
[docs]class Optimize(Action):
"""An action that will optimize the value of `parameter` to either maximize or
minimize the output of a `detector` during a simulation. Extra keyword arguments are
passed on to the Scipy method:
`minimize <https://docs.scipy.org/doc/scipy/reference/generated/scipy.optimize.minimize.html>`_
This action offers a simplified interface that allows an optimization
to be done during a simulation. By default the the Nelder-Mead optimization
method is used but can be overriden. The user should read the Scipy documentation
to determine which options should be used which are method dependant.
Notes
-----
Default optimizer used is `nelder-mead`. To set the absolute and relative error
targets use (From the scipy documentation:
https://docs.scipy.org/doc/scipy/reference/optimize.minimize-neldermead.html)
xatol : float, optional
Absolute error in xopt between iterations that is acceptable for convergence.
fatol : float, optional
Absolute error in func(xopt) between iterations that is acceptable for convergence.
These can be set as keyword arguments to the action.
Parameters
----------
detector : str
The name of the detector output to maximize / minimize.
parameter : [:class:`~.Parameter` | str | tuple]
The parameter or name of the parameter to optimize, or a tuple of parameters
when using multiple targets to optimize over.
bounds : list, optional
A pair of (lower, upper) bounds on the parameter value. Requires a method
that uses bounds.
offset : float, optional
An offset applied to the detector output when optimizing, defaults to 0.
kind : str, optional
Either 'max' for maximization or 'min' for minimization, defaults to 'max'.
max_iterations : int, optional
Maximum number of solver iterations, defaults to 10000.
method : str, optional
Optimisation method to use, see Scipy documentation for options.
name : str, optional
The name of this action, defaults to 'maximize'.
update_maps : bool, optional
If you are changing some parameter or variable that a `Map` depends on
then setting this flag to `True` will recompute the `Map` data for each
iteration of the optimiser.
pre_step : Action, optional
Action to run on each step of the optimisation.
**kwargs
Optional parameters passed to the Scipy optimisation routine as the
`options` input. See Scipy method documentation to determine what is available.
"""
def __init__(
self,
detector,
parameters,
bounds=None,
offset=0,
kind="max",
max_iterations=10000,
tol=None,
verbose=False,
method="nelder-mead",
opfunc=None,
update_maps=False,
pre_step=None,
name="optimize",
**kwargs,
):
super().__init__(name)
try:
self.detector = detector.name
except AttributeError:
if is_iterable(detector):
self.detector = tuple(str(_) for _ in detector)
else:
self.detector = str(detector)
if isinstance(parameters, str):
self.parameters = (parameters,)
else:
try:
self.parameters = (*parameters,)
except TypeError:
self.parameters = (parameters,)
self.bounds = bounds
self.offset = offset
self.kind = kind
self.max_iterations = max_iterations
self.tol = tol
self.kwargs = kwargs
self.verbose = verbose
self.method = method
self.update_maps = update_maps
self.opfunc = opfunc
self.pre_step = pre_step
@property
def parameter_names(self):
return tuple(
param if isinstance(param, str) else param.full_name
for param in self.parameters
)
def _do(self, state):
from scipy.optimize import minimize
if state.sim is None:
raise Exception("Simulation has not been built")
if not isinstance(state.sim, CarrierSignalMatrixSimulation):
raise NotImplementedError()
out_wss = set( # workspaces can be in both lists
(*state.sim.readout_workspaces, *state.sim.detector_workspaces)
)
if not isinstance(self.detector, str):
dws = []
for det in self.detector:
for ws in out_wss:
if ws.oinfo.name == det:
dws.append(ws)
if len(dws) != len(self.detector):
raise RuntimeError(
f"Could not find a detector with the name {self.detector}"
)
else:
dws = None
for ws in out_wss:
if ws.oinfo.name == self.detector:
dws = ws
break
if dws is None:
raise RuntimeError(
f"Could not find a detector with the name {self.detector}"
)
params = tuple(
convert_str_to_parameter(state.model, param)
for param in self.parameter_names
)
if len(params) == 0:
raise RuntimeError(
f"Could not find a parameter with the name {self.parameters}"
)
sol = OptimizeSolution(self.name)
sol.iters = 0
if self.opfunc is None:
def func(x, params, state, dws):
for a, p in zip(x, params):
p.value = a
# Determine what the detector workspace needs to calculate
# an output.
if self.update_maps:
state.sim.update_map_data()
if self.pre_step:
state.apply(self.pre_step)
if dws.needs_carrier or dws.needs_signal or dws.needs_noise:
state.sim.run_carrier()
if dws.needs_signal or dws.needs_noise:
state.sim.run_signal(dws.needs_noise)
if self.kind == "max":
error = -np.abs(np.abs(dws.get_output()) + self.offset)
else:
error = np.abs(np.abs(dws.get_output()) - self.offset)
if self.verbose:
print(x, error)
return error
opfunc = func
else:
opfunc = self.opfunc
res = minimize(
opfunc,
np.array([_.value for _ in params]),
bounds=np.atleast_2d(self.bounds) if self.bounds else None,
tol=[self.tol] if self.tol else None,
options={"maxiter": self.max_iterations, **self.kwargs},
method=self.method,
args=(params, state, dws),
)
if self.verbose:
if self.offset == 0:
print(
f"Optimized {self.detector} to {res.fun:.6g} at {self.parameter_names} = {res.x[0]:.6g}"
)
else:
print(
f"Optimized {self.detector} to {self.offset:g}{res.fun:+.6g} at {self.parameter_names} = {res.x[0]:.6g}"
)
sol.result = res
sol.x = res.x
sol.parameters = self.parameter_names
return sol
def _requests(self, model, memo, first=True):
memo["changing_parameters"].extend(self.parameter_names)
# pass along requests needed from action called each step
if self.pre_step:
self.pre_step._requests(model, memo)
# DDB temp comment out
# if self.detector not in model.elements:
# raise RuntimeError(f"Could not find a detector called {self.detector}")
# det = model.elements[self.detector]
# if not (isinstance(det, ReadoutDetectorOutput)) and not (
# np.issubdtype(det.dtype, np.integer)
# or np.issubdtype(det.dtype, np.floating)
# or np.issubdtype(det.dtype, np.complexfloating)
# ):
# raise RuntimeError(
# f"Detector {self.detector} must output a single integer or floating point value not {det.dtype}"
# )
[docs]class Minimize(Optimize):
__doc__ = (
"""An action that minimizes some detector output by applying some feedback
to multiple targets in a model.
"""
+ Optimize.__doc__
+ """
Examples
--------
Simple example that minimizes some measured power by feeding back to the laser
power::
model = finesse.Model()
model.parse('''
l l1 P=1
pd P l1.p1.o
minimize(P, l1.P)
''')
sol = model.run()
print(sol.result)
"""
)
def __init__(self, detector, parameter, name="minimize", *args, **kwargs):
super().__init__(detector, parameter, *args, name=name, kind="min", **kwargs)
[docs]class Maximize(Optimize):
__doc__ = (
"""An action that maximizes some detector output by applying some feedback
to multiple targets in a model.
"""
+ Optimize.__doc__
+ """
Examples
--------
Simple example that maximizes the power in a coupled cavity solution by
moving multilpe mirrors::
model = finesse.Model()
model.parse('''
l l1 P=1
m m1 R=0.98 T=0.02 phi=10
m m2 R=0.99 T=0.01
m m3 R=1 T=0 phi=-20
link(l1, m1, m2, m3)
pd P m3.p1.i
maximize(P, [m1.phi, m3.phi], xatol=1e-7, adaptive=True)
''')
print(sol.result)
"""
)
def __init__(self, detector, parameter, name="maximize", *args, **kwargs):
super().__init__(detector, parameter, *args, name=name, kind="max", **kwargs)